Fall protection for sandwich elements
Discover our innovative product solutions for use on sandwich roof elements.
Our solutions for sandwich elements
-
LUX-top® RVT
Attachment point for fastening to negatively laid trapezoidal profile
-
LUX-top® SDS/ SDS-20
Attachment point for fastening through sandwich roof elements into the load-bearing substructure
-
Cable system LUX-top® FSE 2003 cannot be driven over
Horizontal stainless steel cable system in non-traversable design
-
Cable system LUX-top® FSE 2003 can be driven over
Horizontal stainless steel cable system in drive-over design
-
Safety roof hooks LUX-top® SDH-RVT
Safety roof hooks for pitched roofs and pitched roofs with trapezoidal profile or sandwich profile roofing
-
LUX-top® FSA 2010 – H
Horizontal stop device with fixed guide
-
Ladder safety device LUX-top® LS II
Ladder safety device for pitched roofs for attachment to rafters or eaves planks, as well as to trapezoidal profiles or sandwich elements
-
Ladder safety device LUX-top® LS IV
The ladder safety device for the flat roof for attachment to the sandwich or trapezoidal profile façade
Safety barriers according to substrate
We plan for you!
Successful construction projects start with sound planning.
Take advantage of our free planning service for sustainable implementation, taking into account your wishes and all technical and legal requirements (in accordance with DGUV Information 201-056).
No problem for us!
Your building project, our expertise. Individual special solutions, perfectly tailored to your needs. From architectural requirements to new roof structures and special fastening substrates – together we will develop the optimum solution for your project!
Things to know about fall protection on sandwich panels
Sandwich elements combine several requirements placed on the roof structure in one product in a simple way. Due to their low dead weight, they are often used for industrial roofs with large spans.
Sandwich element properties
The sandwich element consists of at least two layers. A protective layer, which is usually a trapezoidal sheet, and a foamed insulating material, which must also meet the fire protection requirements. The special feature is that all layers are firmly bonded together.
The sandwich elements have a low dead weight. This is why they are often used for lightweight industrial roofs. The advantage of the low weight makes the installation of fall protection on sandwich elements a small challenge, which LUX-top has convincingly mastered with two products from its extensive range.
LUX-top® offers you
the right fall protection for sandwich panels
LUX-top® SDS is connected to the substructure of the roof. The anchor point is therefore attached below the sandwich panel to the steel or timber structure of the hall, which ensures very effective fall protection.
The LUX-top® RVT goes a decisive step further. The anchor point has been specially developed for use on negatively laid trapezoidal profiles. Its support plate has a multi-hole pattern. This means that the carrier plate has holes that can be used universally, (almost) regardless of how high or wide the belts are. The carrier plate is permanently, securely and tightly fastened to two top chords using sealing rivets.
In addition to the anchor points, the LUX-top® LS ladder safety device and LUX-top® SDH safety roof hooks are also frequently used on sandwich panels.
